Twin Mode Status Page - adept technology GadgetGateway User Manual

5.10Twin Mode Status Page

Gadget Gateway Web-based Interface
tration completes. Setting this option to off will disable forwarding of packets by both
routers until arbitration completes and only one router goes active. The default is Off.
Status SNVT Update Time: The twin monitoring application has a status SNVT type 93. If
bound the status SNVT is propagated either on a timer or when it is updated by the moni-
toring application or both or neither. The Status SNVT update time determines the maxi-
mum time between propagations. If the update time is non zero, every update time ms a
status SNVT is scheduled for propagation. It is propagated even if the status has not been
updated. If the update time is zero then no propagation is scheduled on a timed interval.
For a more detailed description of the Status SNVT see Section 2.5.5.
Status SNVT Send on Update: The Status SNVT propagate on update option schedules the
status SNVT for propagation whenever the SNVT is updated or the status changes. This is
event driven and not time driven. For a more detailed description of the Status SNVT see
Section 2.5.5.
Twin IP Address: This field displays/sets the redundant twin's IP address
Twin IP Port: This field displays/sets the redundant twin's IP port
709 Domain: These fields display the common domain address used for both the IP and
LON 709.1 stacks.
Twin IP side Subnet/Node: This field displays the subnet/node address of the twin's IP side
709.1 stack.
Twin LON CN side Subnet/Node: This field displays the subnet/node address of the twin's
LON component network side 709.1 stack.
Twin Mode ON/OFF: These radio buttons turn twin mode on or off.
Trigger Twin App Service Pin: This button propagates a service pin message from the twin
mode monitoring application. This enables remote commissioning of the twin mode appli-
cation.
Clear Twin LON CN Config: This button clears the component network configuration
about its twin from this devices memory.
Sync Data From Twin: This button manually requests a sync packet from its twin.
Sync Data To Twin: This button manually sends a sync packet to its twin.
Submit Changes: This button updates the configuration memory of the device and
refreshes the web page to reflect any changes.

5.10 Twin Mode Status Page

The Twin Mode Status page displays operational state and statistics information about the
Redundant Twin Mode operation. Twin mode is an optional enhancement and is not acti-
5-21