Displaying Ospf Link State Information - HP ProCurve 6200yl Multicast And Routing Manual

OSPF Link State Database for Area 0.0.0.0
LSA Type Link State ID
---------- --------------- --------------- ---- ----------- ----------
Router 10.0.8.32
Router 10.0.8.33
Network 10.3.2.37
Summary 10.3.16.0
Summary 10.3.16.0
Summary 10.3.17.0
Summary 10.3.17.0
AsbSummary 10.0.8.36
OSPF Link State Database for Area 10.3.16.0
LSA Type Link State ID
---------- --------------- --------------- ---- ----------- ----------
Router 10.0.8.33
Router 10.0.8.34
Network 10.3.16.34
Figure 5-18. Example of Show IP OSPF Link-State Output
This Field... Displays...
Hello Interval Configured hello interval for this interface.
Rtr Dead Interval Configured router dead interval for this interface.
Designated IP address of the router that has been elected designated
Router
router on this interface.
Backup Desig. Rtr IP address of the router that has been elected backup desig­
nated router on this interface.
Events Number of times the interface state has changed.
If you issue a show ip ospf interface vlan <vlan-id> command, the information
will be the same as shown in the previous table, but for the IP address on the
indicated VLAN.

Displaying OSPF Link State Information

To display OSPF link state information, enter show ip ospf link-state at any CLI
level. When you enter this command, the switch displays an output similar to
the following:
Advertising
Router ID
10.0.8.32
10.0.8.33
10.0.8.37
10.0.8.33
10.0.8.35
10.0.8.33
10.0.8.35
10.0.8.33
Advertising
Router ID
10.0.8.33
10.0.8.34
10.0.8.34
Age Sequence # Checksum
65 0x80000281 0x0000a7b6
1638 0x80000005 0x0000a7c8
1695 0x80000006 0x00000443
1638 0x80000007 0x0000c242
1316 0x80000008 0x0000aa58
1638 0x8000027b 0x0000becf
1316 0x80000008 0x0000a957
1412 0x80000002 0x00002cba
Age Sequence # Checksum
1727 0x8000027e 0x0000d53c
1420 0x80000283 0x0000de4f
1735 0x80000005 0x00001465
IP Routing Features
Configuring OSPF
5-61