Displaying Statistics For All Vrrp Instances In A Vlan - HP ProCurve 6200yl Multicast And Routing Manual

Virtual Router Redundancy Protocol (VRRP)
Displaying VRRP Configuration and Statistics Data
ProCurve(config)# show vrrp vlan 10
VRRP Virtual Router Statistics Information
Vlan ID
Virtual Router ID
State
Up Time
Virtual MAC Address
Master's IP Address
Associated IP Addr Count : 1
Advertise Pkts Rx
Zero Priority Rx
Bad Length Pkts
Mismatched Interval Pkts : 0
Mismatched IP TTL Pkts
Figure 6-14. Example of Displaying Statistics for All VRs in a VLAN
6-32

Displaying Statistics for All VRRP Instances in a VLAN

Syntax: show vrrp vlan < vid > [statistics]
This command displays the VRRP statistics for all VRs
configured on the specified VLAN.
The actual statistics data per VR is the same as for the show
vrrp [statistics] command (pages 6-29 and 6-31).
Note that show vrrp vlan < vid > and show vrrp vlan < vid > statistics
produce the same output.
In the following example, there is one VR configured in VLAN 10.
: 1
: 0
: 0
: 0
: 10
: 10
: Master
: 6 mins
: 00005e-00010a
: 10.10.10.1
Become Master
Zero Priority Tx
Bad Type Pkts
Mismatched Addr List Pkts : 0
Mismatched Auth Type Pkts : 0
: 1
: 0
: 0