HP ProCurve 6200yl Multicast And Routing Manual page 190
Procurve series switch
Hide thumbs
Also See for ProCurve 6200yl:
- Access security manual (390 pages) ,
- Software update npi technical training (19 pages) ,
- Reference manual (765 pages)
Table of Contents
Advertisement
IP Routing Features
Configuring RIP
5-30
Queries – The number of RIP queries that have been received by the
■
routing switch.
■
RIP Interface Information – RIP information on the VLAN interfaces
on which RIP is enabled.
•
IP Address – IP address of the VLAN interface running rip.
•
Status – Status of RIP on the VLAN interface.
•
Send mode – The format of the RIP updates: RIP 1, RIP 2, or RIP 2
version 1 compatible.
•
Recv mode – The switch can process RIP 1, RIP 2, or RIP 2 version
1 compatible update messages.
•
Metric – The path "cost", a measurement used to determine the 'best'
RIP route path; 1 is the best, 15 is the worse, 16 is unreachable.
•
Auth – RIP messages can be required to include an authentication
key if enabled on the interface.
RIP Peer Information – RIP Peers are neighboring routers from which
■
the routing switch has received RIP updates.
•
IP Address – IP address of the RIP neighbor.
•
Bad routes – The number of route entries which were not processed
for any reason.
•
Last update timeticks – How many seconds have passed since we
received an update from this neighbor.
Syntax: show ip rip
Advertisement
Table of Contents
