Advertising Ospf Link State Information To Bgp; Displaying And Maintaining Ospf - HP HPE FlexNetwork 7500 series Configuration Manual

Step
4. Enable BFD echo
packet mode for
OSPF FRR.

Advertising OSPF link state information to BGP

After the device advertises OSPF link state information to BGP, BGP can advertise the information
for intended applications. For more information about BGP LS, see
To advertise OSPF link state information to BGP:
Step
1. Enter system view.
2. Enter OSPF view.
3. Advertise OSPF link state
information to BGP.

Displaying and maintaining OSPF

Execute display commands in any view and reset commands in user view.
Task
Display OSPF process information.
Display OSPF GR information.
Display OSPF FRR backup next hop
information.
Display OSPF LSDB information.
Display OSPF next hop information.
Display OSPF NSR information.
Display OSPF neighbor information.
Display neighbor statistics for OSPF
areas.
Display OSPF routing table
information.
Display SPF tree information.
Command
ospf primary-path-detect bfd echo
Command
system-view
ospf [ process-id | router-id router-id |
vpn-instance vpn-instance-name ] *
distribute bgp-ls
Command
display ospf [ process-id ] [ verbose ]
display ospf [ process-id ] graceful-restart [ verbose ]
display ospf [ process-id ] [ area area-id ] fast-reroute
lfa-candidate [ topology topo-name ]
display ospf [ process-id ] lsdb [ brief | originate-router
advertising-router-id | self-originate ]
display ospf [ process-id ] lsdb { opaque-as | ase } [ link-state-id ]
[ originate-router advertising-router-id | self-originate ]
display ospf [ process-id ] [ area area-id ] lsdb { asbr | network |
nssa | opaque-area | opaque-link | router | summary }
[ link-state-id ] [ originate-router advertising-router-id |
self-originate ]
display ospf [ process-id ] nexthop
display ospf [ process-id ] non-stop-routing status
display ospf [ process-id ] peer [ verbose ] [ interface-type
interface-number ] [ neighbor-id ]
display ospf [ process-id ] peer statistics
display ospf [ process-id ] routing [ ip-address { mask-length |
mask } ] [ interface interface-type interface-number ] [ nexthop
nexthop-address ] [ verbose ]
display ospf [ process-id ] [ area area-id ] spf-tree [ verbose ]
103
Remarks
By default, BFD echo packet mode for
OSPF FRR is disabled.
"Configuring BGP."
Remarks
N/A
N/A
By default, the device
does not advertise OSPF
link state information to
BGP.