HP ProCurve 6200yl Multicast And Routing Manual page 233

ProCurve(config)# show running
Running configuration:
; J8697A Configuration Editor; Created on
release #K.11.00
hostname "ProCurve"
module 1 type J8702A
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged A1-A24
ip address dhcp-bootp
exit
ip load-sharing 3
access-controller vlan-base 2000
Figure 5-29. Displaying a Non-Default IP Load-Sharing Configuration
Indicates a non-default IP load-sharing configuration
allowing three equal-cost next-hop paths for routed traffic
with different subnet destinations. If the router is configured
with the default IP load-sharing configuration, IP load-
sharing does not appear in the show config or show running
command output.
IP Routing Features
Configuring OSPF
5-73