Displaying Ospf Virtual Neighbor Information - HP ProCurve 6200yl Multicast And Routing Manual

Procurve series switch
Hide thumbs Also See for ProCurve 6200yl:
Table of Contents

Advertisement

IP Routing Features
Configuring OSPF
OSPF Virtual Interface Neighbor Information
Router ID
--------------- --------------- -------- --------------- --------
10.0.8.33
10.0.8.36
Figure 5-23. Example of Output for Show IP OSPF Virtual-Neighbor
Table 5-13. CLI Display of OSPF Virtual Neighbor Information
Field
Description
Router ID
The router ID of this virtual neighbor (configured).
Area ID
The area ID of the transit area for the virtual link to this neighbor (configured).
State
The state of the adjacency with this virtual neighbor. The possible values are the same as the
OSPF neighbor states. See the State parameter definition in table 5-12 on page 5-64. Note that
virtual neighbors should never stay in the 2WAY state.
IP Address
IP address of the virtual neighbor that the routing switch is using to communicate to that virtual
neighbor.
Events
The number of times the virtual neighbor's state has changed.
5-66
This display shows the configured restrict entries.

Displaying OSPF Virtual Neighbor Information

To display OSPF virtual neighbor information, enter show ip ospf virtual-
neighbor at any CLI level.
Area ID
10.3.16.0
10.3.16.0
Syntax: show ip ospf virtual-neighbor [area < area-id > | < ip-address >]
This display shows the following information.
Notice from the syntax statement that you can get OSPF virtual neighbor
information for a specific area or a specific IP address.
State
IP Address
FULL
10.3.17.33
FULL
10.3.18.36
Events
5
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 5400zlProcurve 3500yl

Table of Contents