Task
Enable or disable FTP client debugging.
Clear the reply information in the buffer.
Terminating the FTP connection
Execute one of the following commands in FTP client view:
Task
Terminate the connection to the FTP server without
exiting FTP client view.
Terminate the connection to the FTP server and return
to user view.
Displaying command help information
Execute one of the following commands in FTP client view:
Task
Display command help information.
Displaying and maintaining FTP client
Execute the display command in any view.
Task
Display source IP address information on the FTP client.
FTP client configuration example in standalone
mode
Network requirements
As shown in
password 123456 has been created on the PC.
•
Use the device as an FTP client to log in to the FTP server.
Download the file temp.bin from the PC to the device.
•
Upload the configuration file startup.cfg from the device to the PC for backup.
•
Figure
25, the PC is acting as an FTP server. A user account with the username abc and
Command
debug
reset
Command
•
disconnect
•
close
•
bye
•
quit
Command
•
help [ command-name ]
•
? [ command-name ]
Command
display ftp client source
84
Remarks
By default, FTP client debugging is
disabled.
N/A