HP ProCurve 6200yl Multicast And Routing Manual page 159

Procurve series switch
Hide thumbs Also See for ProCurve 6200yl:
Table of Contents

Advertisement

Message
Illegal operation in BSR state
machine
Malformed Candidate-RP adv recvd
from < ip-addr >
MCAST MAC add for < mac-addr > failed
MCAST flow < src-ip-addr >,
< multicast-addr > not rteing (rsc low)
Multicast Hardware Failed to
initialize
No IP address configured on VID < vid-# >
No route to source/rp < ip-addr >
No RP for group < ip-addr >
Pkt dropped from < ip-addr > <reason>,
vid < vid-# >
Pkt rcvd with a cksum error from
< ip-addr >
PIM socket error
Rcvd pkt ver# < # >, from < ip-addr >,
expected < # >
Rcvd pkt from rtr < ip-addr >, unkwn pkt
type <pkt-type>
Rcvd hello from < ip-addr > on vid
< vid-# >
Rcvd incorrect hello from < ip-addr >
Rcvd unkwn opt < # > in <pkt-type> pkt
from < ip-addr >
Rcvd unkwn addr fmly <add-family> in
<pkt-type> pkt from < ip-addr >
Meaning
An illegal state/event combination has been detected in the
BSR state machine.
The switch received a malformed C-RP-advertisement.
The indicated interface could not join the multicast group
for PIM packets.
A multicast flow has been dropped due to low resources
The multicast hardware cannot be enabled.
An IP address is not configured for the indicated interface
enabled with PIM.
PIM was unable to find a route to the specified IP address.
PIM-SM needed an RP for the indicated group address, but
none was found.
Received a packet from the indicated IP address and VLAN,
and dropped it.
A packet arrived from the indicated IP address with a
checksum error.
There was an error regarding the PIM socket, either on a
sockopt call or a recvfrom call.
Received a packet from the indicated IP address with the
wrong PIM version number.
Unknown PIM packet type received from the indicated IP
address.
A misconfiguration exists between the routers.
An incorrect HELLO packet was received from the indicated
IP address.
A PIM packet with an unknown option number was received
from the indicated IP address.
A PIM packet with an unknown address family was
received.
PIM-SM (Sparse Mode)
Event Log Messages
4-67

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 5400zlProcurve 3500yl

Table of Contents