HP ProCurve 6200yl Multicast And Routing Manual page 160

PIM-SM (Sparse Mode)
Event Log Messages
Message
Rcvd <pkt-type> pkt with bad len from
< ip-addr >
Send error(< error-# >) on < packet-type >
pkt on VID < vid-# >
Static RP configuration failure:
< src-ip-addr >, < multicast-addr >
Unable to alloc a buf of size < size >
for < memory element >
Unable to alloc a msg buffer for
< system-event >
Unable to allocate <table-type> table
Unexpected state/event < state >/<event >
in < statemachine > statemach
VLAN is not configured for IP.
4-68
Meaning
A PIM packet with an inconsistent length was received from
the indicated IP address.
Send packet failed on the indicated VLAN.
The configuration of a static RP for the indicated multicast
group has failed on the indicated interface.
PIM_DM could not allocate memory for the indicated buffer.
Informs the user that a message buffer could not be
allocated for the indicated system event.
The PIM interface has been removed due to an IP address
removal or change.
PIM received an event type in a state that was not expected.
A VLAN must be statically configured with a primary IP
address before enabling PIM-SM on that VLAN. If the VLAN
has no IP address or is configured to acquire a primary IP
address by using DHCP/Bootp, it cannot be configured to
support PIM-SM.