Listing Currently Configured Pim Interfaces; Displaying Ip Pim Vlan Configurations - HP ProCurve 6200yl Multicast And Routing Manual
Procurve series switch
Hide thumbs
Also See for ProCurve 6200yl:
- Access security manual (390 pages) ,
- Software update npi technical training (19 pages) ,
- Reference manual (765 pages)
Table of Contents
Advertisement
Listing Currently Configured PIM Interfaces
Syntax: show ip pim interface
Lists the PIM interfaces (VLANs) currently configured in the
router.
VLAN: Lists the VID of each VLAN configured on the switch to
support PIM-DM.
IP Address: Lists the IP addresses of the PIM interfaces
(VLANs).
Mode: Shows dense or sparse, depending on which PIM
protocol is configured on the router.
ProCurve(config)# show ip pim interface
PIM Interfaces
VLAN IP Address
---- --------------- ------------
1
10.1.10.1
2
10.2.10.1
Figure 4-16. Example Showing Two PIM Interfaces Configured
Displaying IP PIM VLAN Configurations
Syntax: show ip pim interface [< vid >]
Displays the current configuration for the specified VLAN
(PIM interface). Refer to table 4-1 on page 4-56.
Displaying PIM-SM Data and Configuration Settings
Mode
sparse
sparse
PIM-SM (Sparse Mode)
4-55
Advertisement
Table of Contents
