Displaying Statistics For A Specific Vrrp Instance; Standards Compliance - HP ProCurve 6200yl Multicast And Routing Manual

Displaying Statistics for a Specific VRRP Instance

Syntax: show vrrp vlan < vid > vrid < 1 - 255 > [statistics]
This command displays the VRRP statistics for a specific VR
configured on a specific VLAN.
The actual statistics data per VR is the same as for the show
vrrp [statistics] command (pages 6-29 and 6-31).
Note that show vrrp vlan < vid > vrid < 1 - 255 > and show vrrp vlan
< vid > vrid < 1 - 255 > statistics produce the same output.

Standards Compliance

VRRP on the switches supported by this Guide includes the following:
■ Complies with RFC 3768 Virtual Router Redundancy Protocol
(VRRP), except for maximum number of VRs per VLAN, which is 32
on the routers covered by this Guide.
■ Compatible with ProCurve Series 9300m routers, the ProCurve 9408sl
router, and the ProCurve Series 8100fl switches. (VRRP on these
devices is based on RFC 2338.)
■ Complies with RFC 2787-- Definitions of Managed Objects for VRRP,
except for support for authentication-related values.
Applies to use on IPv4 routers.
■
Virtual Router Redundancy Protocol (VRRP)

Standards Compliance

6-33