Vlan Parameters; Interface Parameters; Wireless 802.11B Parameters - Proxim ORiNOCO AP-2500 User Manual

Using the Command Line Interface

VLAN Parameters

Name
VLAN
Status
VLAN ID Table
Name
VLAN ID Table
Index
Identifier (ID)

Interface Parameters

Since the AP-2500 devices support two PC Card slots, we differentiate the two wireless interfaces by using the table
index:
— Slot A = index 3
— Slot B = index 4
The wireless interface group parameter is wif, which displays the objects associated with both PC Cards A and B.

Wireless 802.11b Parameters

Name
Wireless Interfaces
Network Name
Distance between APs
Auto Channel Select (ACS)
Interference Robustness
DTIM Period
Operating Frequency Channel
RTS/CTS Medium Reservation
Multicast Rate
Closed Wireless System
Load Balancing
Type Values
Group N/A
Integer enable
disable (default)
Type Values
Table N/A
Integer32 1 (Wireless A)
2 (Wireless B)
VlanId 0 (disable) or 1 – 4094
Type Values
Group N/A
DisplayString 1 – 31 characters
My Wireless Network A
(default)
My Wireless Network B
(default)
Integer large (default)
medium
small
minicell
microcell
Integer enable (default)
disable
Integer enable (default)
disable
Integer 1 – 65535
1 = default
Integer 1 - 11 (FCC) (3 = default)
1 - 13 (ETSI) (3 = default)
1 - 14 (JP) (3 = default)
10 - 13 (FR)
(10 = default)
Integer 0 – 2347
Default is 2347 (off)
Integer 1 Mbit/sec (1)
2 Mbit/sec (2) (default)
5.5 Mbit/sec (3)
11 Mbit/sec (4)
Integer enable
disable (default)
Integer enable (default)
disable
Access CLI Parameter
R vlan
RW vlanstatus
Access CLI Parameter
R vlanidtbl
R index
RW id
Access CLI Parameter
R wif
RW netname
RW distaps
RW autochannel
RW interrobust
RW dtimperiod
RW channel
RW medres
RW multrate
RW closedsys
RW ldbalance
209