Setting Of Country/Language (Function Code 52) (User-Accessible) - Brother MFC990CW Service Manual

9.1.4.14 Setting of Country/Language (Function code 52) (User-accessible)

Function
Machines have been customized for their destination countries with the corresponding
EEPROM customizing codes (see
customizing codes are shared by two or more destination countries, so the machines customized
by these codes require further specifying individual destination countries or languages.
Usually, the user specifies the destination country or language on the LCD screen called up
automatically when turning the machine on first after purchase. In the same way, the service
personnel also specifies it if the main PCB is replaced; however, if he/she skips the
specification process at that timing, he/she needs to perform the procedure given below.
NOTE: This function is applicable to "Oceania" and "Pan-Nordic.".
Oceania
Australia
New Zealand
Operating Procedure
(1) Press the 5 and 2 keys in this order. For models without numerical keypad, enter 5 and 2 in
this order using the
The "Set Country / Press OK" appears on the LCD.
(2) Press the OK key.
The country name appears on the LCD.
NOTE: The country name on the LCD varies depending on the destination (specified with
Function code 74).
Oceania
Australia
New Zealand
(3) Use the
the desired country or language.
NOTE: For selectable countries and languages, refer to the tables shown above.
(4) Press the OK key (Photo Capture key for models without OK key), and the machine
saves the new setting and returns to the initial stage of the maintenance mode. This
completes the setting procedure.
Pan-Nordic
Norge
Suerige
-- Suomi
-- Danmark
-- Others
, and OK keys.
Pan-Nordic
Norge
Suerige
-- Suomi
-- Danmark
-- Others
and keys (Scan and Copy keys for models without
Section 9.1.4.25, Function code 74). However, some
9-28
and keys) to display
Confidential