Brother MFC990CW Service Manual page 218

Assembling Notes:
• Models with microphone: Before mounting the rubber keypads, route the microphone
*1
harness (a part of the panel-main harness) through the cable guides provided on the
control panel base as shown below.
1
Microphone
* Microphone harness
Cable guides
Grounding wire
• After completion of assembling of the control panel ASSY, wipe fingerprints or dust off
the LCD surface with a soft cloth.
1
*
(Rear)
Cable guides
LCD flat cable
2
*
6-34
*1 For models with microphone
*2 For models with touch panel
Panel-main harness
2
Touch panel harness *
Control panel
PCB ASSY
(6_35_MFC_r1)
Confidential