Printout Of Dial Log (Maintenance Mode 37) (For Fax Models Only); Setting Of Country/Language (Maintenance Mode 52); Printout Of Dial Log; Setting Of Country/Language - Brother MFC Series Service Manual

1.4.11 Printout of Dial Log (Maintenance mode 37) (for Fax Models Only)

<Function>
This function outputs a list of telephone numbers dialed.
<Operating Procedure>
(1) Enter [3] and [7] in the initial stage of the end user-accessible maintenance mode.
The machine displays "PRINTING" on the LCD and prints out a list of dial log.

1.4.12 Setting of Country/Language (Maintenance mode 52)

<Function>
Machines have been customized for their destination countries with the corresponding
EEPROM customizing codes list (refer to
(Maintenance mode 74) in this
two or more destination countries, so the machines customized by these codes require
further specification of individual destination countries or languages.
Note This function applies to "France and surrounding areas", "Pan-Nordic", "Oceania",
"Iberia" and "Gulf/Turkey" only.
<Operating Procedure>
(1) Enter [5] and [2] in the initial stage of the maintenance mode.
The machine will display "Set Country" on the LCD, and the name of the country that is
set will appear in the local language.
(2) Touch panel model
Press the country name of the user on the LCD.
The selected country appears on the confirmation screen in the local language.
Non-touch panel models
Select the country name of the user with [ ] or [ ], and press [OK].
The selected country appears on the confirmation screen in the local language.
(3) If the choice is correct, press "Yes".
The machine stores the setting, customizes the EEPROM, and returns to the initial
stage of the maintenance mode.
1.4.24 Customize Code Destinations
chapter). However, some customizing codes are shared by
5-25
Confidential