6.1.18 Bank ASSY and Base Pad on the Paper Tray ASSY
(1) Pull the four lock arms on the rear of the paper tray outwards and release the four latches of
the bank ASSY. Then pull the bank ASSY up and out of the paper tray.
(2) If the base pad needs to be replaced, peel it off the bottom of the paper tray.
Note: Once removed, the base pad will become unusable and a new pad will have to be put
• When attaching a new base pad to the paper tray, align the edge of the base pad with the
front edge of the depressed section on the paper tray as shown below.
• When mounting the bank ASSY, first insert the four pawls into the openings in the paper
tray and then press the inside of the bank ASSY so that the latches snap into place.
Align the edge of the
base pad with the front edge
of the depressed section on the