Brother MFC990CW Service Manual page 502

Inljet mfc/dcp
Hide thumbs Also See for MFC990CW:
Table of Contents

Advertisement

WSW46
Selector
No.
1
Monitoring the PC ON/OFF state
2
Parallel port output pins kept at
3
high level
Previous filtering parameters for
4
white level compensation
(Not used.)
Prevention of ink splashing in ink
5
near-empty state
6
Waiting time for scanning for a
|
single copy
(Not used.)
8
Note: Selector 4 is not applicable to models equipped with flat-bed scanner.
• Selectors 1 and 2: Monitoring the PC ON/OFF state
For the related functions, refer to WSW36, selectors 2 and 3.
• Selector 3: Parallel port output pins kept at high level
Setting this selector to "0" will keep all parallel output pins of the machine at high level.
Use this setting if Resource Manager (bundled with MFC models) installed to WindowsNT
running on the connected PC fails to monitor the power ON/OFF state of the machine.
• Selector 4: Previous filtering parameters for white level compensation (Not used.)
At the start of scanning operation, the machine usually initializes white and black level data
stored in the EEPROM by scanning the white reference film attached to the inside of the
scanner top cover. After long use of the machine, however, the film may be contaminated
with dust or dirt. Accordingly, incorrect white level data will be set up so that white vertical
streaks will be brought on the scanning result.
Setting this selector to "0" (Enable) will apply previously saved white level data instead of
new incorrect compensation.
• Selector 5: Prevention of ink splashing in ink near-empty state
Setting this selector to "0" (Enable) prevents ink splashing by decreasing the head drive
voltage when the "Ink near-empty state" is detected.
(Monitor of power ON/OFF state and parallel port kept at high)
Function
App. 4-50
Setting and Specifications
No. 1 2
0 0 :
Disable
0 1 :
Monitor SELECT IN
1 0 :
Monitor STROBE
1 1 :
Monitor both SELECT IN
and STROBE
0: Enable
0: Enable
0: Enable
No. 6 7 8
0 0 0 :
Without WAIT
0 0 1 :
1 sec.
0 1 0 :
2 sec.
0 1 1 :
3 sec.
1 0 0 :
4 sec.
1 0 1 :
5 sec.
1 1 0 :
6 sec.
1 1 1 :
7 sec.
1: Disable
1: Disable
1: Disable
sec.: second(s)
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents