Brother MFC990CW Service Manual page 444

(3) On your PC, run "filedg32.exe."
The Filedrgs window will appear as shown below.
(4) Drag and drop the firmware (e.g., lz0023_a.pmu) onto the Brother Maintenance USB
Printer driver icon in the Filedrgs window.
Note: To use a firmware file, extract it beforehand by double-clicking. It is a self-
extracting file having the extension .exe.
After approx. 2 to 5 minutes, the loading operation is complete and the machine
automatically reboots and returns to the standby state.
(5) Display the version of the firmware installed on the LCD using the following steps to
check it.
Models with numerical keypad on the control panel
Simultaneously press the * and # keys.
Models without numerical keypad on the control panel
Simultaneously press the
- Sample version number shown on the monochrome LCD: A0307252244:CF30
- Sample version number shown on the color LCD:
(The top line shows the version number.)
If the displayed version number is identical with the firmware version you installed,
the loading operation has been successfully finished.
Note: If loading operation ends abnormally, turn the machine off and on. Wait for the
machine to emit a long beep (MFC only) and automatically enter the firmware loading
mode, and then perform the loading procedure above again.
and Stop/Exit keys.
App. 2-6
0A630619103:FE46
P0601242005:4123
B0601242005:1C8D
Confidential