Continuous Adjustments Of Density And Registration Sensor (Function Code 73); Setting The Serial Number (Function Code 80) - Brother HL-3160CDW Service Manual

1.5 Continuous Adjustments of Density and Registration
Sensor (Function code 73)
Perform continuous adjustments of density and registration sensor in accordance with
Continuous adjustments of density / registration sensor (Function code 73)" in Chapter
1.6

Setting the Serial Number (Function code 80)

<Operating procedure>
(1) Press the [8], and then the [0] in the initial state of maintenance mode. "MACERR_01:****"
is displayed on the LCD.
(2) Press the [Go] several times until "USB:************" is displayed on the LCD.
(3) Press the [9], [4], [7], and [5] in this order to enter the edit mode.
(4) Use the keypad to enter the first digit of the serial number. The second digit starts to flash.
Enter the second digit to the 15th digit similarly.
Memo:
When you enter alphanumeric characters other
than A, B, C, D, E and F, see the right table and
press the corresponding key until the desired
character is displayed.
(5) Press the [SET], and the new serial number is saved. The machine returns to the initial
state of maintenance mode.
Serial number can also be configured through the service setting tool (SvSettingTool.exe).
Follow the procedure below:
(1) Enter the maintenance mode.
(2) Connect the machine to your computer using the USB cable.
(3) Open the temporary folder and double-
click "MemoryAccessTool.exe". The
screen shown on the right appears.
(4) Click the [Execute] and close the
Maintenance Exception Tool screen.
Wait for five seconds or longer and then
proceed to the next step.
Note:
• If the [Execute] on the Memory access tool is pressed once, the serial number written to
the machine is valid as long as the machine does not quit the maintenance mode.
• If the BRMODELCODE, the Serial, and the ID fields display abnormally, quit the
maintenance mode and then restart from step (1). When they display abnormally, the
machine is still in the state that the serial number cannot be written even if the [Execute]
is clicked.
Keypad
4
5
6
7
8
9
4-4
"1.3.21
5.
Assigned characters
4 → G → H → I
5 → J → K → L
6 → M → N → O
7 → P → Q → R → S
8 → T → U → V
9 → W → X → Y → Z
Confidential