Checking Of Cordless Handset Id Code And Base Id Code (Function Code 086) - Brother MFC990CW Service Manual

9.2.2.2 Checking of Cordless Handset ID Code and Base ID Code (Function code 086)

Function
The cordless handset and base unit (cordless PCB in the machine) each have a unique ID code.
When the machine leaves the factory, the cordless handset ID code is registered to the base unit,
and the base ID code, to the cordless handset so that the handset and base unit are exclusively
paired. Once paired, they can identify each other and initiate wireless communication between
them.
Up to four cordless handset ID codes can be registered to the base unit.
Function code 086 allows you to check the cordless handset ID code and base ID code
registered in the handset.
Operating Procedure
(1) On the cordless handset, press the Menu/OK, *, #, 0, 8, 6, and # keys in this order in the
standby state.
The cordless handset displays its ID code as shown below.
Handset
ID = XXXXXXXX
(2) To display the base ID code registered in the cordless handset, press the
cordless handset.
Base Unit
ID = YYYYYYYY
(3) To return to the standby state, press the Off key or leave the handset for one minute without
pressing any key.
9-75
or key on the
Confidential