(5) Release the CIS motor harness from the cable guides provided at the left end of the upper
cover.
(6) While supporting the scanner cover by hand, pull the lock arm provided on the rear of the
scanner cover damper and release the damper from the scanner cover.
Scanner cover damper
Scanner cover
(Scanner unit)
Lock arm
Assembling Note: Route the CIS motor harness as shown below.
Route the CIS motor
harness on this side.
CIS motor harness
Scanner cover support
Scanner cover
(Scanner unit)
CIS motor harness
Scanner cover damper
6-14
Scanner cover support
Main PCB
Upper cover
Lower cover
(6_12)
Upper cover
(6_14)
Confidential