1.4.16 Setting by country (Function code 74)
<Function>
This function allows you to customize the EEPROM according to language, function settings,
and worker switch settings.
Note:
If you replace the main PCB, be sure to carry out this procedure.
<Operating procedure>
(1) Press the
the maintenance mode. Then, press the OK button. The present customizing code is
displayed.
(2) Enter the upper 2 digits of the country setting code that you want to set.
Press the
moves to the second digit.
Press the
cursor moves to the fourth digit.
Note:
When the upper 2 digits of an invalid country setting code are entered, the setting is
ignored, and the cursor returns to the first digit.
(3) Enter the lower 2 digits of the country setting code that you want to set.
Press the
and press the Go button.
(4) The new setting is saved, and "PARAMETER INIT" is displayed on the LCD. After the
setting is saved, the machine returns to the initial state of the maintenance mode.
or
button to display "MAINTENANCE 74" on the LCD in the initial state of
or
button to enter the first digit and press the OK button, and the cursor
or
button to enter the second digit and press the OK button, and the
or
button to enter the third and fourth digits (in the range from 00 to 50)
7-31
Confidential