1.3.14 Setting of Country/Language (Maintenance mode 52)
<Function>
Machines have been customized for their destination countries with the corresponding EEPROM
customizing codes list (refer to
chapter). However, some customizing codes are shared by two or more destination countries, so the
machines customized by these codes require further specification of individual destination countries
or languages.
Note
This function applies to "France and surrounding areas", "Pan-Nordic", "Eastern Europe",
"Oceania" and "Iberia" only.
<Operating Procedure>
(1) Press the [5] and [2] keys in this order in the initial stage of the maintenance mode.
The machine will display "Set Country" on the LCD, and the name of the country that is set will
appear in the local language.
(2) Touch panel model
Press the country name of the user on the LCD.
The selected country appears on the confirmation screen in the local language.
Rubber key panel model
Select the country name of the user with the [ ] or [ ] key, and press the OK key.
The selected country appears on the confirmation screen in the local language.
(3) If the choice is correct, press the "Yes" key.
The machine stores the setting, customizes the EEPROM, and returns to the initial stage of the
maintenance mode.
1.3.27 Customize Code Destinations (Maintenance mode 74) in this
5-29
Confidential