Brother MFC990CW Service Manual page 270

Inljet mfc/dcp
Hide thumbs Also See for MFC990CW:
Table of Contents

Advertisement

Paper ejection roller and platen
(13) Release the PF timing belt from the paper ejection roller gear.
(14) Pull the lock arm of the bushing at each end of the paper ejection roller outwards and turn it
upright.
(15) Lift the paper ejection roller and remove the platen from the engine unit.
Assembling Note: When mounting the paper ejection roller, first insert the tab of the gear
holder on its left side into the slit in the platen, set the roller's bushings into the engine
chassis, and then fit the bosses on the lock arms of the bushings into the holes provided in
the engine chassis as shown below.
Gear holder on the
paper ejection roller
Lock arm of bushing
Paper ejection
roller gear
PF timing belt
Paper feed motor
harness
PF encoder/registration
sensor harness
Platen
Insert this tab into
the slit in the platen
Paper ejection roller
Lock arm of bushing
Gear
holder
(Front)
Engine unit
6-86
Engine unit
Boss
Paper ejection
roller
Hole
(6_80)
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents