Checking Of Cordless Handset Id Code; Checking Of Base Id Code - Brother MFC990CW Service Manual

Inljet mfc/dcp
Hide thumbs Also See for MFC990CW:
Table of Contents

Advertisement

9.2.3.3 Checking of Cordless Handset ID Code

Function
The cordless handset has a unique ID code. When the machine leaves the factory, the cordless
handset ID code is registered to the base unit, and the base ID code, to the cordless handset so
that the handset and base unit are exclusively paired. Once paired, they can identify each other
and initiate wireless communication between them.
Up to four cordless handset ID codes can be registered to the base unit.
This function allows you to check the cordless handset ID code registered in the handset.
Operating Procedure
(1) On the cordless handset, press the Menu/OK, *, 1, 9, 3, and 7 keys in this order in the
standby state.
The "SW VERSION" appears on the handset's LCD.
(2) Press the
The cordless handset displays its 10-digit ID code as shown below.
Handset
ID = XXXXXXXXXX
(3) To return to the standby state, press the C key twice.

9.2.3.4 Checking of Base ID Code

Function
The base unit (cordless PCB in the machine) has a unique ID code. When the machine leaves
the factory, the cordless handset ID code is registered to the base unit, and the base ID code, to
the cordless handset so that the handset and base unit are exclusively paired. Once paired, they
can identify each other and initiate wireless communication between them.
Up to four base ID codes (Base1, Base2, Base3, and Base4) can be registered to the cordless
handset.
This function allows you to check the base ID code(s) registered in the handset.
Operating Procedure
(1) On the cordless handset, choose the desired base unit (Base1, Base2, Base3, or Base4) with
the following steps in the standby state.
1) Press the Menu/OK key.
2) Press the
3) Press the
4) Press the
(2) Press the Menu/OK, *, 1, 9, 3, and 7 keys in this order in the standby state.
The cordless handset displays "SW VERSION."
or
key to display "TEST IPUI" and press the Menu/OK key.
or
key to choose HS Settings. Then press the Menu/OK key.
or
key to choose Select BASE. Then press the Menu/OK key.
or
key to choose the desired base unit. Then press the Menu/OK key.
9-80
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents