Assembling Notes: When mounting the MJ/PS shield unit onto the lower cover, route the
power supply harness through the U-shaped cutout (shown on the previous page) provided
in the lower MJ/PS shield.
After mounting the MJ/PS shield unit, route the power supply harness through the channel
and route the main-MJ (EXT) harness
the lower cover as shown below.
Main-MJ (LINE) harness (yellow)
and main-MJ (LINE) harness
Main-MJ (EXT) harness (black)
ASF motor harness
Paper feed motor harness
Hook switch harness
Power supply harness
on the left side of
*1 For MFC only
*2 For models with handset