Brother MFC990CW Service Manual page 396

Inljet mfc/dcp
Hide thumbs Also See for MFC990CW:
Table of Contents

Advertisement

(7) If either of the left and right margins is out of the specified range, press the 6 key twice and
the * key on the machine. For models without numerical keypad, enter 6, 6, and * in this
order using the
NOTE: In models with touch panel, to display the numerical, * and # keys, it is necessary
to switch the software keypad between the numerical and function keypads by pressing the
Scan and Copy keys simultaneously.
The "LEFT: 10" appears on the LCD.
(8) To adjust the left margin in 600 dpi, enter the measured value (in units of 0.1 mm)
multiplied by 10.
In this example, the left margin measured in step (6) is 0.8 mm, so press the 0, 8, and OK
keys.
NOTE: In models having no OK key on the control panel, press the Photo Capture key.
The "RIGHT1: 10" appears on the LCD.
(9) To adjust the right margin in 600 dpi, enter the measured value (in units of 0.1 mm)
multiplied by 10.
In this example, the right margin measured in step (6) is 1.1 mm, so press the 1, 1, and OK
keys. For models without numerical keypad, enter 1 and 1 using the
and then press the OK key again.
The "LEFT2: 10" appears on the LCD.
(10) To adjust the left margin in 1200 dpi, enter the measured value (in units of 0.1 mm)
multiplied by 10.
In this example, the right margin measured in step (6) is 0.9 mm, so press the 0, 9, and OK
keys. For models without numerical keypad, enter 0 and 9 using the
and then press the OK key again.
The "RIGHT2: 10" appears on the LCD.
(11) To adjust the right margin in 1200 dpi, enter the measured value (in units of 0.1 mm)
multiplied by 10.
In this example, the right margin measured in step (6) is 1.2 mm, so press the 1, 2, and OK
keys. For models without numerical keypad, enter 1 and 2 using the
and then press the OK key again.
Upon completion of the entry, the machine automatically returns to the initial stage of the
maintenance mode.
(12) Go back to step (5) and print out the left and right margin check pattern again.
(13) Measure the left and right margins on the printed pattern.
If both of the left and right margins are within the range from 0.9 to 1.1 mm, the adjustment
is completed.
Bottom margin adjustment
(14) Drag and drop the "bottomadj.prn" onto the Brother Maintenance USB Printer driver icon
in the Filedrgs window shown on the previous page.
The machine displays the "RECEIVING DATA" on the LCD and prints out the
"BOTTOM adjust" pattern (see
bottom margin.
(15) Measure the bottom margin on the printed pattern.
(Example) Bottom margin: 3.1 mm
If it is within the range from 2.9 to 3.1 mm, no adjustment is required. If not, go to step
(16).
,
and OK keys.
page 9-47
9-44
for a sample printout). This is for checking the
,
and OK keys
,
and OK keys
,
and OK keys
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents