Eeprom Parameter Initialization (Function Code 198) - Brother MFC990CW Service Manual

Inljet mfc/dcp
Hide thumbs Also See for MFC990CW:
Table of Contents

Advertisement

9.2.2.6 EEPROM Parameter Initialization (Function code 198)

Function
This function initializes the contents of the EEPROM in the cordless handset to the initial
values, erasing all personal information stored.
NOTE: This function also erases the cordless handset ID code and base ID code which have
been registered to the EEPROM in the cordless handset.
Operating Procedure
(1) On the cordless handset, press the Menu/OK, *, #, 1, 9, 8, and # keys in this order in the
standby state.
The following appears on the handset's LCD.
E2PROM INIT
1. Yes 2. No
Number input
(2) To initialize the contents of the EEPROM in the cordless handset, press the 1 key; to cancel
initialization, press the 2 key.
If you press the 1 key, the following confirmation screen appears.
All Delete?
1. Yes 2. No
Number input
(3) To initialize it, press the 1 key again; to cancel initialization, press the 2 key.
(4) To return to the standby state, press the Off key or leave the handset for one minute without
pressing any key.
9-78
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents