Set Worker Switches (Wsw) And Print Worker Switch Setting Data (Function Code 10, 11) - Brother HL-2290 Service Manual

1.3.4 Set worker switches (WSW) and print worker switch setting data
(Function code 10, 11)
[1] Set worker switches (Function code 10)
<Function>
The worker switches shown in the table below can be used to set the function to satisfy
various requirements. These switch settings can be changed using the keys on the control
panel.
The worker switches are factory set to conform to the laws and regulations of the country the
machine is shipped to. Do not change these settings unless necessary.
WSW No.
WSW17 Selector 5
WSW47 Selector 8
WSW49 Selector 7
WSW56 Selector 1
WSW56 Selector 6
WSW56 Selector 7
WSW59 Selector 1
WSW63 Selector 3
WSW63 Selector 8
WSW64 Selector 1-6
WSW64 Selector 7-8
WSW65 Selector 1-2
WSW65 Selector 3
WSW65 Selector 4
WSW65 Selector 5
WSW65 Selector 6
WSW65 Selector 7
WSW81 Selector 1
WSW81 Selector 2
Change time display method
(American: MM/DD/YY or European: DD/MM/YY)
Change USB 2.0 High-Speed/USB 1.1 Full-Speed
Paper size setting for PDF direct printing
Change ON/OFF setting for PS emulation
Change coverage type
Change ON/OFF setting for PCL emulation
(This selector is applicable to models equipped without PCL.)
Change ON/OFF setting for USB serial number (SN) sending
Change time display method
(Japanese: YY/MM/DD or others)
Change ON/OFF setting for Israeli font support
Language setting
Default paper size setting
Default media type setting
Change ON/OFF setting for BOND paper support
Change ON/OFF setting for HAGAKI paper support
Change ON/OFF setting for OHP support
Change ON/OFF setting for LABEL paper support
Change ON/OFF setting for glossy paper support
Change ON/OFF setting for PS emulation
Change ON/OFF setting for PCL emulation
5-10
Function
Confidential