Brother MFC990CW Service Manual page 180

5.1 AT THE USER SITE
5.1.1 Transferring Received FAX Data
When the machine at the user site requires to be repaired, unplugging the power cord from the
electrical outlet for sending the machine for repair will lose received FAX data if left in the
machine.
To prevent such data loss, the service personnel should instruct end users (e.g., by telephone) to
transfer data to another facsimile machine using the procedure below.
Note: The DCP does not support this function.
Note: The number of files that can be transferred at a time is 99. To transfer 100 files or more,
carry out the following procedure more than one time.
Tip: If there are both color and monochrome data in a file to be transferred, the monochrome
data will be transferred first. If the receiver machine does not support the color function, the
sender machine cannot transfer color data, resulting in an error.
Operating Procedure
(1) Connect the machine (that has received data in the memory) to be repaired to the telephone
line.
(2) Switch the machine on.
(3) Models without touch panel
Press the Menu, Black Start (Mono Start), and Menu keys in this order.
TIP: For models with numerical keypad, you may press the Menu, Black Start (Mono
Start), and 0 keys instead in the same way as conventional models.
Models with touch panel
Press the Menu key on the touch panel (or the Scan and Copy keys on the control panel
simultaneously). Next, press the Black Start (Mono Start) key and then press the Scan
and Copy keys simultaneously.
TIP: For models with numerical keypad on the control panel, you may press the Menu key
on the touch panel (or the Scan and Copy keys on the control panel simultaneously), the
Black Start (Mono Start) key, and the 0 key on the numerical keypad instead in the same
way as conventional models.
The machine displays "
ready to accept function codes from the keys.
(4) Transfer received FAX data to another facsimile machine, referring to
9.1.4.15 "Transfer of Received FAX Data and/or Equipment's Log (Function code 53)
(User-accessible)."
" on the LCD, indicating that the machine is
5-1
Chapter 9, Section
Confidential