Smt Menus; Applying Nat In The Smt Menus; Figure 6-3 Applying Nat For Internet Access; Figure 6-4 Applying Nat To The Remote Node - ZyXEL Communications ZyWALL 10 User Manual

6.2

SMT Menus

6.2.1 Applying NAT in the SMT Menus

You apply NAT via menus 4 or 11.3 as displayed next. The next figure how you apply NAT for Internet
access in Menu 4. Enter 4 from the Main Menu to go to Menu 4 - Internet Access Setup.
This figure shows how you apply NAT to the remote node in Menu 11.1.
Step 1. Enter 11 from the Main Menu.
Step 2. Move the cursor to the Edit IP field, press the [SPACEBAR] to toggle the default No to Yes,
then press [ENTER] to bring up Menu 11.3 - Remote Node Network Layer Options.
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Addr= N/A
Network Address Translation= Full Feature
Metric= N/A
Private= N/A
RIP Direction= None
Version= N/A
Multicast= None
NAT
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= Ethernet
Service Type= Standard
IP Address Assignment= Dynamic
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:

Figure 6-3 Applying NAT for Internet Access

Menu 11.3 - Remote Node Network Layer Options

Figure 6-4 Applying NAT to the Remote Node

ZyWALL 10 Internet Security Gateway
My Login= N/A
My Password= N/A
Login Server IP= N/A
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
6-5