Configuring The Lan Ip Alias Screen - ZyXEL Communications AMG1302-T10A User Manual

When you use IP alias, you can also configure firewall rules to control access between the LAN's
logical networks (subnets).
Note: Make sure that the subnets of the logical networks do overlap.
The following figure shows a LAN divided into subnets A, B, and C.
Figure 42 Physical Network & Partitioned Logical Networks
Ethernet
Interface

7.5.1 Configuring the LAN IP Alias Screen

Use this screen to change your Device's IP alias settings. Click Network > LAN > IP Alias to open
the following screen.
Figure 43 Network > LAN > IP Alias
The following table describes the labels in this screen.
Table 26 Network > LAN > IP Alias
LABEL
IP Alias
IP Address
IP Subnet Mask
Apply
Cancel
AMG1302-T10A User's Guide
DESCRIPTION
Select the check box to configure another LAN network for the Device.
Enter the IP address of your Device in dotted decimal notation.
Alternatively, click the right mouse button to copy and/or paste the IP address.
Your Device will automatically calculate the subnet mask based on the IP address that
you assign. Unless you are implementing subnetting, use the subnet mask computed by
the Device.
Click this to save your changes.
Click this to restore your previously saved settings.
A: 192.168.1.1 - 192.168.1.24
B: 192.168.2.1 - 192.168.2.24
C: 192.168.3.1 - 192.168.3.24
Chapter 7 LAN Setup
91