Directory Server Add And Edit; Figure 119 Directory Server Add And Edit; Table 77 Directory Server Add And Edit - ZyXEL Communications P-660HN User Manual

Table 76 Directory Servers
LABEL
Modify
Add

12.5.1 Directory Server Add and Edit

Use this screen to configure information about a directory server that the ZyXEL Device can
access. Click Security > Certificates > Directory Servers to open the Directory Servers
screen. Click Add (or the details icon) to open the Directory Server Add screen.

Figure 119 Directory Server Add and Edit

The following table describes the labels in this screen.

Table 77 Directory Server Add and Edit

LABEL
Directory Service Setting
Name
Access Protocol
Server Address
Server Port
Login Setting
P-660HN-Fx User's Guide
DESCRIPTION
Click the Edit icon to open a screen where you can change the information about
the directory server.
Click the Remove icon to remove the directory server entry. A window displays
asking you to confirm that you want to delete the directory server. Note that
subsequent certificates move up by one when you take this action.
Click this to open a screen where you can configure information about a directory
server so that the ZyXEL Device can access it.
DESCRIPTION
Type up to 31 ASCII characters (spaces are not permitted) to identify this
directory server.
Use the drop-down list box to select the access protocol used by the directory
server.
LDAP (Lightweight Directory Access Protocol) is a protocol over TCP that
specifies how clients access directories of certificates and lists of revoked
A
certificates.
Type the IP address (in dotted decimal notation) or the domain name of the
directory server.
This field displays the default server port number of the protocol that you select in
the Access Protocol field.
You may change the server port number if needed, however you must use the
same server port number that the directory server uses.
389 is the default server port number for LDAP.
Chapter 12 Certificates
205