No Reinforcement Strips On The Output Without An Error Message - Oce 9800 User Manual

Remove all tape between the rollers and knives (see figure 152).
3
[152] Removing the tape
Lead a new trailing edge of tape between the rollers and knives. For more
4
information see 'Inserting a new tape roll' on page 97.

No reinforcement strips on the output without an error message

This error occurs when there are no reinforcement strips on the output although
reinforcement is selected. To check whether reinforcement is selected see
'Selecting reinforcement' on page 54.
If you are processing A4 formats reinforcement could be disabled for this
Note:
format. For more information see 'Handling A4 formats' on page 75.
To solve this error:
Press the 'Stop' button on the operating panel twice.
1
Open the side door of the Reinforcement unit.
2
134 Océ 9800 Printer User Manual