Defining Default Language Settings; Language (Data Format) - Oce 9800 User Manual

Defining default language settings

During installation language settings will be defined for your particular system
by the Océ service engineer. If these settings change in time, you can use
system administrator mode to define new system-wide defaults.

Language (data format)

The following default print settings can be overruled by settings that are
Note:
sent along with the print job.
The Océ 9800 accepts print files in various data formats (languages). You can
change the settings for Calcomp, HP-GL, HP-GL/2, and ASCII.
Setting the default language format
Open the 'Formats' card in the 'Language' section (see figure 72).
1
Press the function button 'Select data format' to select the required language.
2
The ASCII, Calcomp and HPGL2 settings are divided over two
Note:
windows. Press the 'Select data format' button again to open the second
window.
Define the appropriate settings.
3
When ready, quit the system administrator mode.
4
Prints:
Ready to print
0
General
Automatics
Pen menu
......................................................................................................................................
Formats
Select
data format
[72] Selecting the required data format: First window of Calcomp settings
82 Océ 9800 Printer User Manual
Step size:
400
Origin:
Calcomp
Lower right
Folding Step &
length origin
................ ................
Machine Program
Synchro code:
2
Double synchro:
no
Synchro
Checksum
width
................
...............
Connect
Language
3
End of
message