Activating The Time Switch - Oce 9800 User Manual

Activating the time switch

The time switch function allows you to program the system to switch itself
automatically on at a specified time and off after a certain idle-time.
The advantages of this time switch are:
convenience in having the system ready for use at the start of the working day
energy-saving when the system is not being used.
Defining the switch on/off time and days
Access the key operator mode.
1
Open the 'Timers' card in the 'Machine' section.
2
Press the function button 'On/Off timer' (see figure 61).
3
Prints: Ready to print
0
Timers
On
08 00.
Zoom
Off after
General
4 hrs.
......................................................................................................................................
Controller
On/Off-timer
[61] On/Off timer
Enter the required switch-on time/switch-off delay (hours/minutes) using the
4
'higher/lower' buttons.
Press the function button 'Work days'.
5
Enter the required working days using the 'higher/lower' buttons.
6
When ready, quit the key operator mode.
7
Make sure that you turn the on/off key to the 'timer' position if you want
Note:
the system to switch on automatically.
66 Océ 9800 Printer User Manual
................
Machine
From:
Monday
Up to:
Friday 2 min
Reset
Work days
time
................ ................
Program Finishing
Time:
12 00
Date:
01 01 95
Time and
Date
................
Copy