Oce 9800 User Manual page 146

Memory allocation warnings:
20813 T
W
Memory allocation warnings:
20814 T
W
20815 T
W
RS-232 errors:
20820 OR
W
20821 OR
W
20822 OR
W
SCSI errors:
Never connect or disconnect a SCSI device while the printer or host system is
Note:
switched 'on'.
20830 OR
W
20831 OR
W
20832 OR
W
Data format errors:
20860 T
W
146 Océ 9800 Printer User Manual
Not enough controller memory; The plot file cannot be processed in
the controller due to insufficient memory in the controller.
Ask your Océ consultant if more memory can be installed.
Set split; The plot set does not fit completely in set memory. The set
will be split into two or more sub sets.
The plot does not fit into set memory and can therefore not be proc-
essed.
Framing error; Check serial communication link and settings
Parity error; Check serial communication link and settings
Overrun error; Check serial communication link and settings
CMD group error; Check SCSI communication link and settings
Check SCSI communication link and settings.
The console displays 'Reset error'. Reboot the system.
SCSI parity error; Check SCSI communication link and settings
Command in the file (format) not supported; Check plot file.