Reading The Display - Oce 9800 User Manual

Reading the display

The display on the printer will show the following components:
Prints:
Ready to print
3
Time:
0 : 11
Jobs:
7
[2] Components of the printer display
By pressing the button under 'Print' in the lower right corner of the display,
you can enable or disable plotting on the Océ 9800 printer.
If 'Print' is selected (black), the system will accept and print incoming jobs.
The jobs will be handled in incoming order. If the controller is currently
processing a print job, the display will show 'Processing'. If 'Print' is not
selected (white) the printing process is stopped after printing the pages that are
already sent to the engine. The system however, will continue to accept
incoming print jobs as long as enough memory is available. For more
information about stopping print jobs, (see 'Stopping a print job' on page 22).
The memory indicator shows the amount of memory that is currently in use,
along with the number of jobs in memory and the time it will take to print these
jobs. 'Prints' in the upper left corner of the display indicates the number of
(sets of) prints that are left to be made for the current job.
The roll indicator shows the kind of copy material and the format that is
currently loaded on the different rolls of the engine.
The message area above the print button area displays the current activity of
the controller.
10 Océ 9800 Printer User Manual
memory indicator
.....................
Processing.
Print
................ ................
Machine Program
Roll 1
A3 Paper
Roll 3
A1 Paper
................ ................
Finishing Copy
Roll 2
A2 Paper
Roll 4
A0 Paper