General Settings - Oce 9800 User Manual

'Fit', if the computed copy material format is not available on one of the
rolls, an instruction will be displayed prompting the operator to load the right
format copy material. The roll selection will not be changed.
'Next size', if the computed copy material format is not available on one of
the rolls, it may be changed to a roll with larger-sized copy material. It will
be printed with the original zoom factor.
'Reduced', if the required copy material format is not available on one of the
rolls, it may be changed to a roll with larger-sized copy material. If such a
roll is also unavailable, it may be changed to a roll with smaller-sized copy
material. If a smaller-sized copy roll is selected, a new zoom factor will be
calculated to prevent information loss.
Defining default Auto roll
Open the 'Automatics' card in the 'Language' section.
1
Press the function button 'Auto roll'.
2
Use the scroll buttons to define the new 'auto roll' mode.
3
When ready quit the system administrator mode.
4

General settings

In this card you can define the system settings 'Print time out' and 'Automatic
Language Sensing (ALS)'. Each parameter will be explained briefly.
Print time out
print data are received. When the timer reaches the selected limit, the system
assumes that the end of file has been reached and the data stream that belongs
to the current print job will be considered terminated.
Defining print time out
Open the 'General' card in the 'Language' section (see figure 77).
1
Prints:
Ready to print
0
General
Automatics
Pen menu
...................................................................................................................................
Formats
[77] general card
86 Océ 9800 Printer User Manual
The print time out is a timer. It is started as soon as no more
15 sec
Print
time out
................ ................
Machine Program
Calcomp
ALS
formats
................
................
Connect
Language
on