Defining The Standard Copy Material Type - Oce 9800 User Manual

Defining the standard copy material type

By defining the standard copy material type, you instruct the Océ 9800 to
select a roll with this copy material, when it has to choose between two rolls
with the same width, but different materials.
The machine cannot detect the loaded copy material type. This should be
Note:
specified when loading a roll of copy material, as described in 'Defining the
type of material' on page 93.
Defining the preferred standard type of copy material
Open the 'Copy material' card in the 'Copy' section.
1
Press the function button 'Standard' to set the standard copy material type (see
2
figure 66).
Prints:
Ready to print
0
Image
Copy
material
......................................................................................................................................
Copy
Standard
size
[66] Default copy material
When ready, quit the key operator mode.
3
72 Océ 9800 Printer User Manual
Polyester Polyester
Transparent Transparent
Paper Paper
Roll 1
................ ................
Machine Program
Polyester
Transparent
Paper
Roll 2
...............
................
Finishing
Copy