Oce 9800 User Manual page 69

You have the possibility to re-store the factory default settings in your 'Default
settings' program by erasing this program:
Returning to the factory default settings
Press the section button 'Program'.
1
Select 'Erase' using the higher/lower buttons.
2
Press the function button 'Default settings'.
3
You will be asked to confirm the erase procedure.
Quit the key operator mode.
4
Storing settings under a program button
Make the settings you want to program.
1
Press the section button 'Program'.
2
Select 'Store' using the higher/lower buttons (see figure 63).
3
Prints:
Ready to print
0
Normal
Exposure
copydelivery:belt1
Synchro cut
Zoom: % (auto)
Zoom % (auto)
Roll: (auto)
Roll: (auto)
Sort by set
Sort by page
Copies: 3
Copies: 1
Default
settings
[63] Storing program settings
Press the button of the appropriate program (1-5) to store the current settings
4
as a group of default printer settings into the selected program memory.
You will be asked to confirm the store procedure when the program
Note:
already contains data.
When ready, quit the key operator mode.
5
Erasing settings under a program button
Press the section button 'Program'.
1
Select 'Erase' (see figure 64).
2
Key operator
1 2
................
................ ................
Machine
Program
Program
Store
Margin
3
(mm)
................ ................
Finishing Copy
4
5
69