Editing; Auto Shift - Oce 9800 User Manual

Editing

The following default print settings can be overruled by settings that are
Note:
sent along with the print job.
The Océ 9800 is equipped with the default editing functions 'Auto shift',
Mirror and 'Shift'. You can select only one edit function at a time.
Only 'Shift', 'Mirror' and 'Autoshift' can be used. 'Stretch' and
Note:
'Erase' can not be used, and should be ignored.

Auto shift

By selecting the auto shift function you can move your image to one side of the
page.
Auto shifting supports these shift options:
Upper left
[34] Auto shift options with standard cut option active
You must switch on standard cut to get copies like the one in the example
Note:
of illustration 34 above. If synchro cut has been switched on, the result will be
as follows:
Upper left
[35] Auto shift options with synchro cut option active
In 'Shifting the image' on page 43 you can read how to define the exact place
of your image on the page.
Default printer settings
Upper right Centre
Upper right Centre
Lower left Lower right
Lower left Lower right
41