Automatics Settings - Oce 9800 User Manual

Pen Priority
Priority:
Language:
The definition of pen settings of the plot file will be used.
Remote:
The default pen settings will be used, unless they are overruled by settings of
the printer driver, that are sent along by the print job.
Defining Pen priority for Calcomp or HP-GL/2 files
Open the 'Formats' card in the 'Language' section (see figure 75).
1
Press the function button 'Select data format' to select Calcomp or HP-GL/2.
2
The Calcomp settings are divided over two windows. To select Pen
Note:
priority for Calcomp, press the 'Select data format' button until the
following window appears:
Prints:
Ready to print
0
General
Automatics
Pen menu
......................................................................................................................................
Formats
Select
data format
[75] Defining Pen priority for Calcomp files
Press the function button 'Pen priority'.
3
Use the higher/lower buttons to select 'Remote' or 'Language'.
4
When ready, quit the system administrator mode.
5

Automatics settings

The following default print settings can be overruled by settings that are
Note:
sent along with the print job.
In this card you can define 'auto rotate', 'legend correction' and 'auto roll'.
Each parameter will be described briefly.
Auto rotate
automatically:
84 Océ 9800 Printer User Manual
For HP-GL/2 and Calcomp files you must also define the Pen
Calcomp
Remote
Pen
priority
It is possible to let the Océ 9800 printer choose a rotation
................ ................
Machine Program
width
................
...............
Connect
Language