Defining Clock Settings; Setting The Current Time And Date - Oce 9800 User Manual

Defining clock settings

The Océ 9800 has an internal clock. This clock must be set accurately. The
clock can be used to switch the Océ 9800 on or off automatically. The way in
which the current time and date is displayed can be adapted to local
conventions and must be configured by the service engineer.
The reset time is the time the system will wait before it returns to the default
settings. This parameter can be modified.
The 'Timers' card in the 'Machine' section allows you to define the following
time-related settings.

Setting the current time and date

To ensure correct functioning of the time switch you must set the current time
and date. The way in which the time and date are displayed can be adapted to
local conventions.
Selecting the required time and/or date
Access the key operator mode.
1
Open the 'Timers' card in the 'Machine' section.
2
Press the function button 'Time and Date' (see figure 59).
3
Prints: Ready to print
0
Timers
On
08 00.
Zoom
Off after
General
4 hrs.
......................................................................................................................................
On/Off-timer
Controller
[59] Time and date notation
You can now adjust the day. Press the function button 'Time and Date' again
4
to enter the month, press the function button 'Time and Date' again to enter the
year.
64 Océ 9800 Printer User Manual
................
Machine
From:
Monday
Up to:
Friday 2 min
Reset
Work days
time
................ ................
Program Finishing
Time:
12 00
Date:
01 01 95
Time and
Date
................
Copy