Lower Output - Oce 9800 User Manual

Lower Output

The following default print settings can be overruled by settings that are
Note:
sent along with the print job.
You can use the 'Delivery' menu to select which output is used to deliver
copies: the 'Upper output' or the 'Lower output'.
If a folding unit is installed, the lower output will be used for folded
Note:
copies. The 'Delivery' menu will not be present.
The following options can be selected in the 'Delivery' menu:
Upper output
High Capacity Stacker.
Lower output
optional container.
Automatic
be collected on the copy delivery tray or High Capacity Stacker (longer than
1230 mm or 48.5"), the lower output is used.
If the Océ 9800 is equipped wth the optional High Capacity Stacker,
Note:
polyester copies are always delivered through the lower output.
Selecting default settings for Lower Output
Open the 'Delivery' card in the 'Finishing' section.
1
Press the 'Delivery' button to select the required output (see figure 56).
2
Prints:
Ready to print
0
Delivery
High cap.
stacker
Stamp
[56] Default settings for Lower Output
Default printer settings
The copies are delivered to a copy delivery tray or the optional
The copies are delivered through the lower output, using an
Normally the upper output is used. Only if the copy is too long to
Folding
length
................ ................
Machine Program
................
................
Copy
Finishing
Automatic
Lower output
Upper output
Delivery
59