Oce 9800 User Manual page 115

[117] Crank.
If the paper keeps coming, it is not cut and you have to cut it manually.
7
Open the prehaeter section by pressing handle 1 down (see figure 118).
8
Pull the green catches 2 towards you and release handle 1 (see figure 118).
9
Pull the green bar 3 towards you (see figure 118).
10
2
[118] Opening of the preheater section
Cut the paper and turn the crank clockwise to deliver the jammed paper.
11
Refer to 'Clearing a paper jam in the roll feed section' on page 116.
12
Remove the crank and return it to its original position.
13
Close as follows:
Push bar 3 to the rear.
1
Press handle 1 downwards.
2
Press catches 2 to the rear.
3
Close the bar of the fuser section.
4
Problem solving
2
3
1
115