Oce 9800 User Manual page 51

Selecting default settings for high capacity output unit
Open the 'Fold delivery' card in the 'Finishing' section.
1
Press the function button 'Print delivery' (see figure 46)
2
Select the required output delivery.
3
Prints:
Ready to print
0
High cap.
stacker
Stamp
Fold
delivery
Fold
[46] Default settings for delivery on the high capacity output unit
Adjusting the side guides of the belts
Loosen the knurled nuts (see figure 47).
1
[47] Adjusting the side guides of the belts
Adjust the plate according the width of the fold package.
2
Tighten the knurled nuts.
3
If you change the folding width and/or the folding length, you have to
Note:
adjust the punching unit.
Adjusting the punching unit
Open the front door of the high capacity output unit.
1
Turn the black knob to adjust the folding width (see figure 48). Refer to the
2
sticker inside the unit.
Default printer settings
................
Machine
Folding
length
................
................
Program
Finishing
Belts
Belt 2
Belt 1
Stack
Print
delivery
................
Copy
51