Pre-Programmed Groups Of Default Settings - Oce 9800 User Manual

Pre-programmed groups of default settings

The following default print settings can be overruled by settings that are
Note:
sent along with the print job.
Besides the standard default settings, the Océ 9800 is equipped with a memory
function which can be used to retrieve 5 extra groups of default settings. This
is useful for jobs which have to be done on a regular basis. Your key operator
can store settings in 5 different programs (see 'Programming groups of default
settings' on page 68). You only need to retrieve the program and send your job
to the printer, thus saving valuable programming time.
Retrieving a default program
Press the section button 'Program'.
1
Select 'Load' using the higher/lower buttons (see figure 57).
2
Prints:
Ready to print
0
stamp
Normal
fold
Exposure
copy delivery belt
Synchro cut Zoom: % (auto)
Zoom % (auto) Roll: (auto)
Roll: (auto) Sort by set
Sort by page Copies: 10
............................................................................................................................................................
Copies: 1
Default
settings
[57] Retrieving a program
Press the function buttons 1 through 5 to load the required program (see
3
figure 57).
The operating panel will now show the selected group of default settings.
4
60 Océ 9800 Printer User Manual
photo
shift
standard cut
copy delivery:belt
Zoom: %(auto))
Roll: (auto)
Sort by page
Copies: 2
2
1 1
................
................ ................
Machine
Program
Program
Load
mirror
copydeliver:belt
fold:
Zoom: % (auto)
Zoom: % (auto)
Roll:3
Roll:4
Sort by set
Sort by page
Copies: 3
Copies: 5
Margin
3 3
(mm)
................ ................
Finishing Copy
4
5