Setting The Reset Time - Oce 9800 User Manual

To select the current time:
Press the function button 'Time and Date'.
5
You can now adjust the hours, press the function button 'Time and Date' again
6
to adjust the minutes.
When ready, quit the key operator mode.
7

Setting the reset time

If you leave the printer unattended (no buttons pressed) long enough, or after
pressing the 'Correction' button, the default printer settings will return to their
standard values if the reset time is enabled. The reset time is the time after
which the system returns to the initial system state with standard values.
The reset time is 2 minutes by default, but can be changed to any time between
1 and 99 minutes, or you can de-activate the reset time.
Setting the reset time
Access the key operator mode.
1
Open the 'Timers' card in the 'Machine' section.
2
Enable 'Reset time' by pressing the function button (see figure 60).
3
Prints: Ready to print
0
Timers
On
Zoom
Off after
General
4 hrs.
......................................................................................................................................
Controller
On/Off-timer
[60] Reset time
Use the numeric or higher/lower buttons to set the required reset time.
4
Or,
Press the function button to deactivate the function thus forcing users to
5
manually reset the system.
When ready, quit the key operator mode.
6
Key operator
From:
Monday
08 00.
Up to:
Friday
Work days
................
................
Program
Machine
Time:
12 00.
Date:
01 01. 95.
2 min
Reset
Time and
time
Date
................ ................
Finishing Copy
65